iConverter 2FMX, 2GMX self-management Fiber to Fiber NEW iConverter 2FMX 8940-x(100M), 2GMX 8980-x(Gigbit) The 100Mbps iConverter 2FXM and the Gigabit iConverter 2GXM are fiber to fiber Ethernet media converters and Network Interface Devices (NIDs) with integrated management. They are also managed optical switches that function as fiber repeaters. The iConverter 2FXM and 2GXM support dual or single fiber and feature Standard and CWDM Small Form Pluggable (SFP) fiber transceivers. The 2FXM and the 2GXM support 802.3ah and Secure OAM (IP-less) management, and features VLAN technology with Q-in-Q to enable E-LAN and E-Line services, QoS prioritization for voice/data/video over Ethernet, Port Access Control and Bandwidth Control. Data sheet  8940DS-A.pdf  8980DS-A.pdf Catalog Omnitron2006catalog.pdf 　 iConverter SFP (Small Form Pulluggable) Fiber Transceivers NEW iConverter CWDM SFP & Standard SFP Fiber Transceivers Omnitron’s Small Form Pluggable (SFP) fiber transceivers provide flexible fiber connectivity for the iConverter 10/100M, GX/TM, 2FXM and 2GXM Network Interface Devices. Omnitron SFPs provide specific fiber network and wavelength requirements, including single or dual fiber, single-mode, multimode and Coarse Wave Division Multiplexing (CWDM). Based on the MSA SFF-8472 standard, Omnitron SFPs support digital diagnostic capability, providing enhanced diagnostic information to assist network administrators with network maintenance and management. SNMP management software, such as NetOutlook, can collect enhanced, real-time diagnostic information including fiber optic Tx power, Rx power, voltage and SFP transceiver temperature. Data sheet  7000DS-A.pdf  7100DS-A.pdf Catalog Omnitron2006catalog.pdf 　 iConverter 1-Module Redundant-Power Chassis NEW iConverter 8245-xxx/8246-xxx/8247-xxx/8248-xxx The iConverter 1-Module Redundant Power Chassis is designed for mission-critical Enterprise applications and demarcation of Ethernet services at the Customer Premises. The chassis supports multiple power sources, configurable 10/100 Ethernet ports and a wide variety of alarm options—making it ideal for locations where power is unavailable or costly to install, or where the monitoring of external events is required. Power source options include load-sharing combinations of Power over Ethernet (PoE), 9-24VDC and 24-60VDC. When used as a PoE device, the chassis is powered through one of the 10/100 network ports from a Power Source Equipment (PSE) such as a switch or a Mid-Span power injecting device. Data sheet  8245DS-A.pdf Catalog Omnitron2006catalog.pdf 　 iConverter 10/100M, GX/TM self-management UTP to Fiber IMPROVED iConverter 890x-x/891x-x(10/100M), 892x-x/893x-x(Gigbit) The iConverter 10/100M and GX/TM are self-managed copper-to-fiber media converters and Network Interface Devices designed for Enterprise edge, FTTX and Metropolitan Ethernet Networks. They are available as a standalone NID that provides a securely managed demarcation point, or as a plug-in module that can manage a chassis or be managed as a regular 10/100 media converter. They are the smallest form-factor NIDs available, and features VLAN technology enable E-LAN and E-Line services, QoS prioritization for voice/data/video over Ethernet. New improvements include Small Form Pluggable transceivers and enhanced support for 802.3ah and Secure OAM management. Data sheet  8900DS-G.pdf  8920DS-C.pdf Catalog Omnitron2006catalog.pdf 　 iConverter 1-Module Power Chassis & 2-Module Managed Power Chassis iConverter 8240-x(1M), 823x-x(2M) The 1 inch high iConverter 1-Module Chassis uses an external AC/DC power adapter, is tabletop or wall-mountable and supports a single iConverter module. It is ideal for managed or unmanaged Fiber-to-the-Premises or Fiber-to-the-Desktop applications where flexibility and modularity are important. Models 8241-1 and 8241-2 support Dying Gasp functionality. The iConverter 2-Module Managed NID Chassis features a single internal universal AC or 18-60VDC power supply and an Ethernet backplane for connectivity between installed modules. The Ethernet backplane enables compact and flexible solutions for delivering multiple managed ports from a fiber uplink.  Data sheet  8240DS-C.pdf  8230DS-E.pdf Catalog Omnitron2006catalog.pdf 　 iConverter 5-Module Managed Power Chassis & 19-Module Managed Power Chassis iConverter 8220-x(5M), 8200-x(19M) The 1U (1.75 inch) high iConverter 5-Module Managed Chassis can be mounted in a 19-inch or 23-inch rack and features dual redundant, load-sharing power supplies.  The 2U (3.5 inch) high iConverter 19-Module Managed Chassis can be mounted in a 19-inch or 23-inch rack and features triple redundant, load-sharing power supplies.  Both chassis supports universal AC, 24VDC or 48VDC power supplies that are hot-swappable and can be used in any combination. The high-density, 19-Module Chassis and the 5-Module chassis feature an Ethernet backplane for connectivity between iConverter modules, and is ideal for the core of the enterprise, Central Office (CO), or Point of Presence (POP) applications where reliability and space are critical. Data sheet  8220DS-F.pdf  8200DS-F.pdf Catalog Omnitron2006catalog.pdf 　 iConverter NMM Network Management Module iConverter NMM 8000-x The iConverter NMM provides SNMP, Telnet or serial port management to the iConverter product line. The NMM is capable of fault-tolerant management of up to nineteen cascaded (daisy chained) chassis from a single IP address, or eighteen remote chassis via Remote OAM management. The NMM continuously polls for status, reports information and configures the parameters of its managed modules as instructed by the network management software (such as NetOutlook). The NMM generates traps reporting special events, including module insertion or removal, link-up or down, power and temperature range violations. Traps can be sent to eight different trap host locations. These features give the network administrator the ability to monitor, control and be alerted when unusual events occur, ensuring reliable network functionality. Data sheet  8000DS-D.pdf Catalog Omnitron2006catalog.pdf 　 iConverter NetOutlook Network Management Software iConverter NetOutlook 8100-0 NetOutlook is an intuitive, SNMP-based network management software application that provides detailed, real-time network status and control of iConverter equipment. Managing a chassis and its modules requires the installation of an iConverter Network Management Module (NMM) or media converter with built-in management in the chassis. NetOutlook supports IP-based and Remote OAM (Secure IP-less or 802.3ah) management of iConverter Network Interface Devices. Using NetOutlook, network managers can monitor network status, configure module parameters and receive user-specified traps. Data sheet  8100DS-D.pdf Catalog Omnitron2006catalog.pdf 　 iConverter 4Tx & 4Tx VT - 4 port Fast Ethernet Switch Module  iConverter 8480-4(4Tx), 8481-4(4Tx VT) The iConverter 4Tx and 4TxVT are compact, managed 4-port 10/100 Ethernet Switches with backplane ports for expansion to adjacent modules. They provide true plug-and-play capability with Auto-negotiation and Auto-crossover features that eliminate the need for manual port configuration and crossover cables. When used in a 2 or 5-Module Chassis with a self-managed fiber converter NID module, the 4Tx and 4TxVT provide managed, high-density NIDs with copper hand-offs from a fiber uplink. They can also be used as unmanaged standalone switches in a 1-Module iConverter chassis. The iConverter 4Tx features Port VLAN, Port Access Control and reporting of MIB Statistics. The 4TxVT extends the capabilities of the 4Tx with per-port based Bandwidth Control and support of the IEEE 802.1Q VLAN (including Q-in-Q multi-stacking) and the IEEE 802.1p QoS standards. Data sheet  8480DS-S.pdf  8481DS-A.pdf Catalog Omnitron2006catalog.pdf 　 Media Converter Modules Lineup 　  UTP to Fiber iConverter GX/TM  10/100/1000Tx UTP to 1000Fx Fiber Self-Managed VLAN Converters iConverter GX/T  10/100/1000T UTP to 1000X Fiber VLAN Media Converters iConverter GX  1000Base-T UTP to 1000Base-Sx/Lx Fiber Media Converters iConverter 10/100M  10/100Tx UTP to 100Fx Fiber Self-Managed VLAN Converters iConverter 10/100VT  10/100 VLAN Media Converters iConverter 10/100  10Base-T or 100Base-Tx to Fast Ethernet Fiber Media Converters iConverter 100Fx/Tx  100Base-Tx UTP to 100Base-Fx Fiber Media Converters iConverter 10FL/T  10Base-T UTP to 10Base-FL Fiber Media Converters 　  Fiber to Fiber iConverter GX/X 1000Base-Fx to 1000Base-Fx Fiber VLAN Switch/Converters iConverter GX/F 1000X to 100Fx Fiber VLAN Media Converters iConverter 1000FF 1000Base-Sx or 1000Base-Lx Fiber Converters iConverter OC12FF OC12/STM4 Fiber Converters iConverter OC3FF OC3/STM1 Fiber Converters iConverter 2Fx 100Base-Fx to 100Base-Fx Fiber VLAN Switch/Converters iConverter 100FF 100Base-Fx Fiber Converters 　 Others iConverter Tx/2Fx  Redundant Fast Ethernet Fiber Media Converters iConverter Tx/2Tx  Redundant Fast Ethernet UTP Media Converters iConverter 10T/2   10Base-T to 10Base-2 Ethernet Media Converters iConverter T1/E1  T1/E1 RJ45/RJ48 or Coax to Fiber Converters iConverter T3/E3  T3 (DS3)/E3 Media Converters iConverter RS232  Serial RS-232 to Fiber Media Converters iConverter RS422/485  Serial RS-422 and RS-485 to Fiber Media Converters